US Stock UV Exposure Unit Screen Printing Plate Making Silk Screening DIY 20" x 24"

This simple UV Exposure Unit Kit is especially designed for personal usage in screen printing; it is easy operated and with very low cost, which will also be the best choice for new hand to start screen printing business.

Features:
The exposure unit is exposed of two 26W UV tubes, which can be swivel adjusted while exposing. The holders can be easily installed because of the two-way clamps; besides, it can be adjusted in different heights and angles to satisfy different exposing demands. The equipped countdown timer makes it easier for exposing time controlling. The equipped black rubber subplate can reduce the ultraviolet reflection during exposing, which can guarantee a better exposure effect. UV Exposure Unit is an important tool in screen making. At present, we have two patterns for your choice. Working principle: screen printing screens are coated with a light sensitive emulsion using a scoop coater.
When the emulsion is dry, place a positive print of your image on the screen. Once you burn the screen, the emulsion that did not get any UV will wash out of the screen exposing the tiny pin holes. The surrounding areas that were exposed to UV will be cured. Hence the ink will pass through screen onto your substrate. The equipped glass can guarantee a closer contact between the transparency film and the screen plate; besides, because of the glass sucker, glass taking is safer and much more convenient.

Parameters:
Voltage: 110V
Exposure Area: 19.7"x23.7" (50x60cm)
Glass Size: 14.6"x18.5"x0.3" (37x47x0.8cm)
Rubber Sub plate Size: 19.7"x23.6" (50x60cm)
Light Tubes' Powder: 26W/pc
Total Powder: 52W
Net Weight: 22Lb (9.7kg)
Gross Weight: 23Lb (10.3kg)
Package Size: 21.26"x16.93"x11.81"(54 x 43 x 30cm)