1.Select the suitable screen frame edgings arcording to your printing graphics.
2.Then connect the screen frame edgings closely with the inner adapting pieces then fix the screws.
Speical Notes :
A:Please don't fasten the for screws of the each conner
B:Just fix everyparts gently
3.Tighten the eight pscs of the M4 six angle wrench fix it up.
4.Streching :take off the out side screws
5.The screen flat screen frame, screen buttons with layering outward into the groove, buckle into both sides
6.With the inner six angle wrench to screen stretched to tension frame.
7.Screen stretching has been finished.
Two photosensive Emulsion coating & Exposure:
It has the same procedures with the traditional screen printing place making process, from screen degreasing, screen flushing and dried and the coating the photosensive emulsion(or sticking the photosensive films)for exposure.
Three printing and screen cleaning printed:
It has the same procedures with the traditional processes while printing or cleaning after printed process
Four removing the screen mesh:
After cleaning the screen mesh and fully dried, please draw back the screen mesh from one corner, then the rubber strips will be pulled off from the grooves.The screen mesh will be removed gradually.
Five screen mesh storage:
Take off the wet part, and can be saved after drying.
Operation method same like the stretching steps.
a. Please don't fasten the each screws of the inner corner adapting pieces ightly, just fix them gently.
b. Please don't fasten of each screws of the inner corner adapting pieces at first.
Self-tensioning Screen Frame
Make ANY Size
Any Size Frame With Price Are 2pcs If You Want Whole Frame Need 4 Or More