1. After well installed, connect the power supply.
2. Turn on the switch and then it will work automatically.
3. Put the probe of the thermometer on the drying table, heat for some time (20 minutes in reference), and then check the actual temp. If the temp is too low or too high, just risen or lower the height of the drying box.
1? Under the condition of indoor temp. is 24C(75F), and no ventilation:
?1?The temp. 3cm under the heating tubes?
a, When all the six tubes are on, it is 240C?464F???it is not recommended?
b, When the four tubes are on?each 2 in both sides and middle??it is170C?338F???it is recommended?
?2?The temp. 5cm under the heating tubes?
a, When all the six tubes are on, it is 260C?500F???it is not recommended?
b, When the four tubes are on?each 2 in both sides and middle??it is190C?374F???it is recommended?
Tip?The indoor temp. and air movement may influence the temp. test, so the thermodetectorisused for test actual temp
Input voltage: 110V
Input power: 1800W
Baking area: 18"x24" (45x60cm)
Maximum temperature: 374? (190?)
1. Adopts stainless steel dry heating tubes ,it can achieve normal use of 1, 000 hours;
2. The effective area of the baking 45*60 centimeter;
3. Adjust the drying head control temperature;
4. Machine head can be adjusted within 100-60 cm;
5. With the bottom four universal castors brake;
6. Advanced electrostatic spray coating;
7. Standard exported carton packaging;
8. Equipped with full set installation tools.
1800 Watt Heating Element - It uses a panel with hundreds of wires flowing through it to provide consistent heat throughout the heating area.NOTE:DON'T TOUCH THE NETWORK WITH HANDS WHEN WORKING.
Rotating and Adjustable Stand.Foundation is consistent with heating box ,stable, saving-space and overcoming the flaw caused by traditional "?"that easily gets knock and stuck.
Easy operation: After well installed, connect the power supply and turn on the switch and then it will work automatically.
With four universal locking casters, easy move. Sturdy design with powder coated housing to prevent rust.
Easy assembly. with a few bolts you have a flash that's ready to be put to work.