10W 1420 CNC Carve Machine DIY USB Laser engraving for Marking Ceramics Stone.

Price: $422.25
Product prices and availability are accurate as of 2020-03-29 16:25:13 UTC and are subject to change. Any price and availability information displayed on https://www.amazon.com/ at the time of purchase will apply to the purchase of this product.
Availability: Not Available - stock arriving soon
CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON SERVICES LLC. THIS CONTENT IS PROVIDED 'AS IS' AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.

Manufacturer Description

10W 1420 CNC Carve Machine DIY USB Laser engraving for Marking Ceramics Stone.

NOTE:

Plug:US PLUG or EU PLUG(fit your country)

Support operating system: Windows 7/8/10

This is the most powerful DIY Laser engraver available. It comes with 10W Laser.

It can engrave metal and stone, cut wood, foam and other materials easily.

Plug and play, Easy to use. Connect the USB cable to the board, install the software and start engraving.

Minimal assembly required. Just a few screws away from connecting to your laptop!

Best customer support for this type of machines on eBay.

Frequently Asked Questions:

1 What kind of metals can this machine mark?

This machine can mark on stainless steel, iron and colorized anodized aluminum, can not engrave/mark on gold or silver, brass, etc.

2 Can it engrave a depth on metal?

There is no visible depth for the mark, can only leave a permanent marking.

3 Can it cut wood?

Can easily cut about 3-4mm normal hardness to soft wood. Hard types of woods should be tested by yourself. Can not cut plywood.

Specifications:

Body material: Aluminum + Acrylic

Drive system: Stepper motor

Stepper precision: 0.00625mm

Engraving area: 14 x 20cm / 5.51" x 7.87"

Engraving speed: 0.02 to 0.2 sec / pixel

Laser power: pulse 10w (100ns Duty 50%) Average 6-6.5W

Marking materials: Stainless steel, iron, anodized aluminum, ceramics, stone

Engraving materials: Wood, bamboo, leather, plastics, etc.

Height restrictions: no

Interface: USB

Package includes:

1pc 10W Laser Engraver

1pc Power supply

1pc USB cable

1pc Safety glasses

1pc Manual Lifting Platform 10x10cm \ 4"x4" (Lab Jack)

Product Features

Software 255 adjustable laser power, low-light positioning, positioning freedom, gray, shortest path algorithm, nanosecond timing of serial data transmission substantially without delay, power adjustable, high power pulsed laser, lifts fast focusing, targeting low light gray print. Power supply Input: AC 100V-240V, 50/60Hz;Power supply Output: DC 12V 4A. Software:Benbox;Weight: 4KG;Package size: 65 * 35 * 25cm.Note:Do not refresh the firmware for refresh the firmware is not guaranteed. Software: Machine developed for use with AC master software, support Chinese, English, Russian, 4 languages. Super-reduced instruction, 1 byte of instruction accounted for more than 40%;Faster than Arduino + grbl, and instantly able to complete the task of interpretation of active instruction; shortest path algorithm can shorten the time.